spence
Junior Member
Posts: 92
|
Post by spence on Aug 11, 2012 16:17:13 GMT 2
Do these fit straight in or is modding needed?
|
|
|
|
Post by Neil on Aug 11, 2012 18:29:40 GMT 2
The calipers bolt on fine, but you will need tospace it out around 9mm & mess about quite a lot with brake discs as they're taller so have to go on the hub face against the wheel, so some machining involved, a press in shim to keep them concentric and longer wheel studs. Also the iron ones are mega heavy and will need to uprate to a mk3 supra brake booster and master cylinder to get rid of the low pedal and spongyness.
Hold fort though, i'm working on a affordable kit using aluminum Mazda RX7 four pot calipers and 283mm discs that will be able to stay inboard.
|
|
spence
Junior Member
Posts: 92
|
Post by spence on Aug 11, 2012 18:36:21 GMT 2
Ok I will wait a bit bud.
|
|
