|
Post by giraffe22 on Jan 10, 2013 23:06:59 GMT 2
Hey guys, i was wondering if anyone has made a bare minimum wiring harness or if anyone know the least amount of wiring you need to run and drive. Im building a track/drift 85 celica supra.
|
|
|
Post by Neil on Jan 11, 2013 0:53:04 GMT 2
Do you want to keep the clocks and things like lights, electric windows ect in the car, or totally strip back? Ecu printouts help loads with trying to figure out what you want to keep. There's quite a lot of wires, so i think it's really more a personal choice rather than an off the shelf item. Most of the time people build a fuseboard into the dash where the radio used to go, so stripping out the whole interior can be more trouble than its worth.
|
|
|
Post by giraffe22 on Jan 11, 2013 1:32:59 GMT 2
Well i already took all the interior out and pulled all the harnesses
|
|
|
Post by Neil on Jan 12, 2013 14:35:52 GMT 2
Ahhhh... Your probably best making your own then. Have you got a copy of the Wiring Diagrams? If you haven't gone too mental with chopping out wired, id put all the terminal plugs back in and spent a bit of time marking out what wire's do what for each branch of the loom.
|
|
|
Post by giraffe22 on Jan 12, 2013 20:28:06 GMT 2
Thanks for the reply, i have a full wiring diagram. So im going to lay out all the harness and get start cutting everything i dont want.
|
|