|
Post by Neil on Nov 17, 2012 20:50:12 GMT 2
Yeah, i still make stuff Been a while, but have been working on some Weld on Rear camber correction Brackets for the Celica Supra to try and eradicate some of the Dirty excess Rear camber angle which piles on after you lower the car. New M12 bolts and camber washers will be supplied so will fit all Aftermarket poly bushes rather than having to drill out the inner sleeves to accept the Oe Toyota Eccentric Bolts Used already for the Toe adjusment on the inner arms. I will be doing the Subframe modification on an exchange Basis as well as selling the brackets and hardware individually so those who are confident welders can do the mod at home.
Exchanged subframes will be Blasted back to allow stitch welding and repair, then Powder coated in a choice of colours. I am also thinking of knocking out some Poly bushes to supply with the Subframe, so it's super easy to refit.
Prices to follow after ive tested everything to be of superior standard
|
|
|
Post by retrogaz on Nov 19, 2012 13:00:56 GMT 2
Looks good mate, how much adjustment is going to be available? Will this pull it back in to 0 camber? Defo try and get a deal going on the poly bushes, it'll make life a whole lot easier lol.
Looking forward to seeing the final product.
|
|
|
Post by Neil on Nov 19, 2012 19:52:51 GMT 2
Looks good mate, how much adjustment is going to be available? Will this pull it back in to 0 camber? Defo try and get a deal going on the poly bushes, it'll make life a whole lot easier lol. Looking forward to seeing the final product. There is 25mm of travel from the original position, And i'm aiming for 0 degrees at full extention with these. Working on supplying new hardware to go with them, so will see on the prototype how much angle is achieved once it's bolted to a car with Looow ride height.
|
|
|
Post by 5mgeeewiz on May 18, 2013 19:57:37 GMT 2
Hi Neil, is this mod still available as this thread seems a little quiet? I am drawing up my plans for this summers rebuild and was wondering how long the subframe modification will take once you have received it? Cheers.
|
|
|
Post by Neil on May 23, 2013 21:39:35 GMT 2
Hi Neil, is this mod still available as this thread seems a little quiet? I am drawing up my plans for this summers rebuild and was wondering how long the subframe modification will take once you have received it? Cheers. I'm getting on this at the weekend, so not long hopefully! Been working on other stuff, so supra stuff has taken a back seat as of late. Gotta make new bolt and camber washers for these as the BMW 5 series ones that people use didn't have a long enough throw, and i want as much adjustment as i can. Will take some progress pictures over the weekend
|
|
|
Post by 5mgeeewiz on May 24, 2013 15:43:05 GMT 2
Cheers for the reply Neil - good luck at the weekend. I am dreading taking the subframe off mine as every bolt on the underside has proved to be seized/corroded beyond belief and has resulted in sheared bolts, stuck parts, swearing and bloody knuckles ......... not necessarily in that order!
|
|
|
Post by Neil on Aug 25, 2018 15:46:52 GMT 2
|
|